Ningxia Jinke Environmental Filter Material Co., Ltd.
Service Hotline:
You are here: Home > news > Content
company's product
Introducing the functional properties of silicone skeletons and other production processes

The silicone skeleton joint is a new high-efficiency skeleton joint that is improved on the basis of the dust collector. a device that separates dust from the flue gas. Overcoming the dust-free strength of the compartments, the inequality and deficiencies of the wind and the wind spread, and expanded the application planning. The dust collection power and adaptability have been improved, and the service life of the filter bag has been prolonged, which has been highly praised and sought after by a wide range of users.

But how do you choose the right silicone backbone and joints to meet your requirements? Ningxia Jinke Environmental Protection Filter Co., Ltd. will bring you a correct understanding:

Silicone skeleton joints are selected:

There are wire or stainless steel wires that meet the strength and rigidity. Galvanized, sprayed, coated silicone and other treatment methods. The skeleton treated with silicone technology can completely replace the stainless steel skeleton. The silicone skeleton joint series products can be widely used in the dust collection system of dust and dust of asphalt mixing plant crushing, grinding machine, dryer, furnace kiln, etc.

The adaptability of the silicone skeleton is very strong, not It will be as simple as a dust bag, subject to high temperature, high humidity, high concentration dust, hygroscopic dust, abrasive dust, flammable and explosive dust. Moreover, the dust is easy to be cleaned, the dust removal power is improved, and the maintenance effect is facilitated.

Production Process:

1. Immerse the finished bag cage into the degreasing tank for 15 minutes with the intention of removing the oil from the outer surface of the bag cage.

2. Remove the bag from the degreasing tank and put it into the washing tank for immersion cleaning, in order to remove the degreaser on the bag.

3. Remove the bag from the cleaning tank and put it into the descaling tank for descaling. The intention is to remove the metal oxide layer on the bag cage and enhance the adsorption force.

4. Remove the cage bone from the descaling tank and put it into the phosphating tank for phosphating, in order to enhance the adhesion of the outer surface of the bag cage.

5. Put the processed bag in the oven, set the temperature to $2100 °C, and dry for 20-30 minutes, in order to remove the water from the bag cage and insist on the boring of the bag body. .

6. Remove the bag cage and spray the prepared silicone evenly on the outside of the bag cage. The coating thickness is from 60 μm to 100 μm.

7. Place the sprayed bag in the oven at a temperature of $2220 °C for 120 minutes. After that, stick to $2200 °C for 30 minutes of heat setting. The bag cage is naturally cooled, and the bag cage silicone spraying process is completed.

8. The thickness of the silicone adhesion is between 60-70 μm.

Address:No. 209-3, No. 566, Century Avenue South, Dawukou District, Shizuishan City  电话:  MobilePhone:  E-mail: