Ningxia Jinke Environmental Filter Material Co., Ltd.
Service Hotline:0515-87596699
Banner
You are here: Home > company's product > Dust removal accessories
company's product
company's product
上上帽
上上帽

       Car seat cap is printed, this is based on Depending on the needs, it depends on what kind of advertising plan the advertisers give. But what if the top shock cap of the car's front shock absorber can't be removed?

In general, if this happens, it should be the screw cap rust or the overflow buckle. In this case, you can first loosen the screw with the screw or drip the oil. If it can't be cut off with a grinder!

       But the car as a transportation thing and the travel of people, the safety of the car body is necessary to ensure the safety of the user's life, so the demolition When driving car parts, there is a need for professional auto repair things, especially the front part of the car body and the rear axle part are screwed with a torque wrench, so the torque wrench is also required to be disassembled when disassembling. It is often the case that the screw is difficult to screw.

        Because the road conditions of the car are different or long-term in the wet zone, the screw is rusted and oxidized. At this moment, it is only required to spray a small amount of screw rust. After removing the rusting agent, loosen the screw after 10 seconds. If the screw is not rusted, it may be caused by improper operation when the screw is loosened, which makes it difficult to disassemble. At this moment, screw the screw in the opposite direction. Return to the original position, and then align the screw with the thread and then disassemble it. This is easy to solve.


Address:No. 209-3, No. 566, Century Avenue South, Dawukou District, Shizuishan City  TelePhone:0515-87596699  MobilePhone:15950316088  E-mail:49362017@qq.com

Mobile