Ningxia Jinke Environmental Filter Material Co., Ltd.
Service Hotline:0515-87596699
Banner
You are here: Home > company's product > Dust cloth bag > Medium temperature cloth bag
company's product
company's product
PPS acid and alkali needle felt dusting bag
PPS acid and alkali needle felt dusting bag

The particulate soot is trapped on the outer surface by the filter element, and the clean gas is filtered and purified by the filter element, and then the filter element flows into the clean room. The clean air is further purified by the activated carbon filter and discharged through the air outlet.

Therefore, after the resistance of the PPS acid-resistant needle felt dust bag reaches the value, it should be cleaned in time.

Do not damage the primary layer during cleaning to avoid power loss.

The outer layer is thickened deep filtration data for layered filtration; the inner large diameter filter element is used to further enhance the overall deep filtration effect and improve the ability to contain impurities.

The average life expectancy is more than five times that of ordinary polypropylene filter bags. The high filtration accuracy is 3um. The collar is a plastic ring.

When using PPS acid and alkali needle felt dust bag, we will find that the general PPS acid and alkali needle felt dust bag is used in high temperature environment, it often encounters some burning, Corrosion, wear, high concentration and other problems, so in the use of this PPS acid-resistant needle felt dust bag, you must first take the necessary protective measures.

Smoke can sometimes be as high as 550 degrees, and many dust collectors can't use this environment, so choose a cooling method for the dust collector.


Address:No. 209-3, No. 566, Century Avenue South, Dawukou District, Shizuishan City  TelePhone:0515-87596699  MobilePhone:15950316088  E-mail:49362017@qq.com

Mobile